2.4" Color TFT LCD Display
Request a Quote
|Diagonal Screen Size||2.4 inch|
|Display Resolution||240 (RGB) x 320|
|Viewing Angle||6 o'clock|
|Interface Type||MCU Parallel, RGB|
|LCD Driver IC||Ilitek ILI9341|
|Module Size (w x h)||42.72 x 59.46 mm|
|Active Area (w x h)||36.72 x 48.96 mm|
|Pixel Size||0.153 x 0.153 mm|
|Operating Temperature||-20 ~ 70°C|
|Touch Screen Option||Resistive Touch Screen|
Technical Support Notes
The provided display driver example code is designed to work with Microchip, however it is generic enough to work with other micro-controllers. The code includes display reset sequence, initialization and example PutPixel() function.
3-line Serial Interface
See ILI9341 datasheet sections 7.1.8 - 7.1.10, 7.6.1 and 19.3.3
4-line Serial Interface
See ILI9341 datasheet sections 7.1.8 - 7.1.10, 7.6.2 and 19.3.4
DT024CTFT vs DT024DTFT Displays
The DT024CTFT uses the same connections as DT024DTFT (please also see DT024DTFT for reference designs).
The C version has three LEDs in series at 20 mA current, while the D version has four LEDs in series with a 15 mA current.
The brightness of both versions is the same at 220 cd/m2.
If using a boost driver like the CAT4139, you will need to change the current set resistor to lower the current to 15 mA. The CAT4139 will generate the higher voltage needed automatically.
If driving the backlight of the C version display with 12 Volts and a series resistor, substituting a D version display will not work since the four LEDs need more than 12 Volts to get the same current flowing.
For any technical questions on this display, please post in the DT024CTFT forum.